Addressable Control Panel
The NFS2-640 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from NOTIFIER.
The NFS2-3030 is an intelligent Fire Alarm Control Panel designed for medium- to large-scale facilities.
The NFS-320 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from NOTIFIER.
Model FWD-200PH-IN is a plug-in type smoke sensor that combines photoelectronic and heat sensing with wireless communication. The sensor transmits a digital representation of smoke density, and temperature variation, through a wireless mesh to a gateway. The gateway sends the information to the pane
Models FWH-200FIX135-IN and FWH-200ROR135-IN are intelligent sensors that utilize a state-of-the-art thermistor sensing circuit for fast response. These sensors are designed to provide open area protection with 50-foot spacing capability as approved by UL 521.
The FWSG acts as a bridge between fire alarm control panels (FACPs) and Wireless fire devices. It is powered by either the SLC loop or by any FACP AUX or UL-Listed fire alarm power supply compatible with the FACP. The gateway uses the FlashScan protocol on the SLC to communicate with the panel and a
Model FWD-200P-IN is a plug-in type smoke sensor that combines a photoelectronic sensing chamber with wireless communication. The sensors transmit a digital representation of smoke density through a wireless mesh to a gateway. The gateway sends the information to the panel when requested.
The Notifier Intelligent VESDA-E SLC with VESDAnet detectors (referred to as 2nd Gen. detectors) have an integrated Signaling Line Circuit (SLC) module to communicate with Notifier Fire Alarm Control Panels (FACP) directly over the SLC loop. The 2nd Gen. detectors are variants of the conventional VE
The FWSG gateway empowers you to establish a robust fire detection and alarm system in environments where traditional wired installations are challenging. Utilizing the Flashscan protocol, this central hub facilitates effortless communication between all networked devices, overcoming limitations pos
The ONYXWorks workstation provides full control of a NOTIFIER life safety system. The intuitive graphical interface displays building floor plans with interactive fire and security alerts, enabling staff to quickly pinpoint, investigate, and respond to events. Customizable screens and multiple confi
The Li-ion Tamer Battery Rack Monitor is a safety product specifically designed to detect the potential thermal runaway of lithium-ion batteries. The key to Li-ion Tamer's value proposition is the distributed gas sensing network that provides the earliest warning of battery failure by detecting whe
The CLSS Gateway serves as a secure bridge between a compatible fire system and the CLSS Cloud platform. When a NOTFIER INSPIRE panel is connected to a CLSS Gateway, it unlocks unlimited access to the powerful CLSS CheckPoint Test & Inspect app with auto-pass and control. This solution can drastical
LAN Connected Horizon is the latest solution for on-premise and remote monitoring of your life safety system. Intuitive graphic visualization provides building operators with actionable insight to quickly pinpoint and respond to events. Valuable for buildings of any size, Horizon can cost-effectivel
The CO Only detector provides addressable, life safety, carbon monoxide detection in a system connected format to support the increasing need to identify dangerous levels of CO.
CLSS is an innovative, all-in-one cloud platform that enables technicians, system integrators, and facilities managers to deliver an enhanced fire safety service, while maximizing the performance efficiencies offered by Honeywell's trusted detection and alarm systems. Unlock the full power of CLSS
The VIEW detector is a high sensitivity photoelectric smoke detector designed for Very Early Warning Fire Detection and used to protect valuable assets and operations where systems must always remain functioning. The high-sensitivity detector features a smoke-sensing chamber and patented optic block
The Photo/CO detector is a multi-criteria detector that delivers both photoelectric smoke detection and carbon monoxide detection with separate outputs for smoke and CO in a standard, cost-effective design.
IntelliQuad PLUS is a multi-criteria, addressable device that provides both fire and carbon monoxide (CO) detection. For fire, the detector combines four separate sensing elements into one unit (photoelectric, CO, infrared, and heat) to sense multiple components of a fire - thus offering our highest
The PTIR is a multi-criteria device, combining photoelectric, thermal and infra-red sensors into a single detector, with c, both UL 268 7th edition and UL 521 listings. The dual listings enable both general and local evacuation options using one detector. The PTIR detector also provides an increased
NOTIFIER'S DVC features 8 channels of industry leading quality audio, 5 firefighter telephone channels, wire, fiber or mixed media networking options, and can broadcast multiple, distinct messages throughout your entire facility simultaneously ensuring that the right people have the right informati
NOTIFIER Self-Test series of smoke detectors are the first UL approved detectors that can be functionally tested automatically, revolutionizing the way life safety systems are installed, tested, and maintained by automating many aspects of the test and inspection process.
The Network Control Display (NCD) is primary display of network control annunciators for NOTIFIER INSPIRE Systems. With a modern contemporary design, the NCD meets today's building aesthetic needs. The intuitive 10" color touch screen display provides color coded system status details and point in
The RLD annunciator provides the N16 FACP (fire alarm control panel) or NCD (Network Control Display) with remote, securely connected information display. This remote 5" touch screen display provides an alert bar indication and counters for the number of events in the system, showing two events sim
The N16x features a modular design to meet your project requirements. Panels can be configured for stand-alone or networked systems. The N16x can support one to ten signaling line modules (SLM), for a capacity of up to 3,180 intelligent addressable devices.


























